how to change diaper genie

How to Change a Diaper Genie – Step-by-Step Guide

Changing diapers is a part of parenting, and having a Diaper Genie makes the process more convenient and hygienic. Diaper Genie is a popular brand that offers a diaper disposal system specially designed to lock in unpleasant odors. While using a Diaper Genie is fairly simple, it’s important to know the correct method to change the bag and keep the system running smoothly. In this article, we will provide you with a step-by-step guide to change a Diaper Genie.

Step 1: Gather Your Supplies

Before you start changing the Diaper Genie, make sure you have all the necessary supplies readily available. Here’s a list of items you’ll need:

  • New Diaper Genie refill bag
  • Gloves (optional but recommended for hygiene)
  • Cleaning wipes or spray (for cleaning the inner pail)

Step 2: Prepare the Diaper Genie

Position the Diaper Genie in a convenient location where you usually change your baby’s diapers. Make sure it’s easily accessible but out of reach from small children.

Step 3: Empty the Diaper Genie

First, open the top lid of the Diaper Genie. Hold the bag cutter and lift the front door to expose the used bag. Pull the bag gently until it’s completely removed from the pail. Tie a knot at the bottom of the bag to secure the dirty diapers inside and prevent any leakage.

Step 4: Insert a New Refill Bag

Remove the plastic ring at the top of the new Diaper Genie refill bag. Pull a few inches of the bag through the center hole in the pail’s front door. Make sure the bag is properly aligned and centered. Then, pull the rest of the bag through the bag cutter until it reaches the bottom of the pail.

Step 5: Secure the Refill Bag

With the new bag in place, close the front door. Pull the bag towards you, creating a small loop. Slip the loop over the hook located at the back of the pail’s lid. This will keep the bag securely in place and ready for use.

Step 6: Test the Diaper Genie

Finally, test the Diaper Genie to ensure it’s functional. Push down on the top of the lid and twist it in a clockwise motion. You should feel some resistance, indicating that the bag is correctly installed. If it moves freely, double-check your bag installation following the previous steps.

Step 7: Dispose of the Used Bag

Dispose of the used bag according to your local waste management regulations. You can tie it in a knot again, place it in a trash bag, and put it in your outdoor garbage bin.

That’s it! You have successfully changed the Diaper Genie and are now ready to tackle more diaper changes with ease and odor control.

Remember to follow the instructions provided by the manufacturer for any specific model you own, as some steps may vary slightly.

Now that you know how to change a Diaper Genie, you can confidently keep your baby’s nursery clean and odor-free!

Leave a Comment