how to change filament mingda magician x

How to Change Filament in Mingda Magician X

Welcome to this step-by-step guide on changing the filament in the Mingda Magician X 3D printer. Whether you are a beginner or an experienced user, this process is essential for optimizing your printing experience and maintaining the quality of your 3D prints.

Step 1: Preparing the Printer

Start by ensuring that your Mingda Magician X 3D printer is powered on and in an idle state. This will prevent any accidental movements during the filament changing process.

Step 2: Heating the Nozzle

Next, navigate to the printer’s menu and select the option to preheat the nozzle. Wait until the nozzle reaches the recommended temperature for filament loading, which is typically around 200-220°C.

Pro Tip: Make sure to consult your printer’s user manual for the exact recommended temperature settings.

Step 3: Unloading the Old Filament

When the nozzle has reached the desired temperature, locate the “Filament” option in the printer’s menu and select “Unload”. This will initiate the unloading process, where the printer will start to reverse the filament. Be careful as the extruded filament might still be hot.

Unloading filament

Step 4: Preparing the New Filament

Take your new filament spool and trim the end with a pair of scissors. This will help ensure a clean feed into the extruder. Insert the trimmed end into the filament guide tube until it reaches the extruder assembly.

Step 5: Loading the New Filament

Now, go back to the printer’s menu and select the “Load” option. The printer will start pushing the new filament into the hot nozzle. Keep a close eye on the extruded filament to make sure it flows smoothly without any obstructions or tangles.

Loading filament

Step 6: Confirming Successful Filament Change

Once the new filament is flowing consistently through the nozzle, the filament change process is complete. You can now exit the menu and proceed with your next 3D printing project.

Pro Tip: It is recommended to perform a test print or calibration cube to ensure that the filament is properly loaded and the printer is functioning correctly.


Changing the filament in your Mingda Magician X 3D printer is a straightforward process that plays a vital role in maintaining print quality. By following these step-by-step instructions, you can effortlessly replace the filament and continue creating fantastic 3D prints.

Happy 3D printing!

Leave a Comment