how to change the time on an armitron watch

How to Change the Time on an Armitron Watch

  1. Find the correct buttons: Armitron watches usually have four buttons: Mode, Reset, Start/Stop, and Lap/Reset. Familiarize yourself with the locations of these buttons before proceeding.
  2. Activate the time-changing function: Press and hold the Mode button until the watch enters time-setting mode. This is usually indicated by the digits blinking on the display.
  3. Select the desired time element: To change the hour, press the Start/Stop button until the correct hour appears on the display. Repeat this step for minutes, seconds, and other time-related elements, using the Reset button to scroll through the options.
  4. Set the correct time: Once you have selected the desired time element, use the Lap/Reset button to increase the value and the Start/Stop button to decrease it. Continue adjusting until the correct time is displayed.
  5. Exit time-setting mode: After setting the correct time, press the Mode button to exit the time-setting mode. The watch should now display the updated time.

Note: The button configurations and specific steps may vary slightly depending on the model of your Armitron watch. Always refer to the instruction manual provided with your watch for the most accurate and detailed information.

Quick Step-by-Step Guide:

  1. Locate the Mode, Reset, Start/Stop, and Lap/Reset buttons on your Armitron watch.
  2. Press and hold the Mode button until the digits blink.
  3. Use the Start/Stop and Reset buttons to select the desired time element.
  4. Adjust the value using the Lap/Reset (increase) and Start/Stop (decrease) buttons.
  5. Press the Mode button to exit time-setting mode.

Leave a Comment